Table of Contents
Advertisement
TRENDnet User's Guide
enable
show spanning-tree blockedports
show spanning-tree port detail
enable
PORT_ID
show spanning-tree statistics
enable
PORT_ID
enable
show spanning-tree summary
enable
clear spanning-tree counters
clear spanning-tree counters
enable
PORT_ID
configure
spanning-tree (disable | enable)
spanning-tree algorithm-timer
configure
forward-time TIME max-age
TIME hello-time TIME
no spanning-tree algorithm-
configure
timer
spanning-tree forward-time <4-
configure
30>
configure
no spanning-tree forward-time
configure
spanning-tree hello-time <1-10>
© Copyright 2018 TRENDnet. All Rights Reserved.
This command displays the
spanning tree information for only
blocked port(s)
This command displays the
spanning tree information for the
interface port.
This command displays the
spanning tree information for the
interface port.
This command displays the
summary of port states and
configurations
This command clears spanning-tree
statistics for all ports.
This command clears spanning-tree
statistics for a specific port.
This command disables / enables
the spanning tree function for the
system.
This command configures the
bridge times (forward-delay,max-
age,hello-time).
This command configures the
default values for forward-time &
max-age & hello-time.
This command configures the
bridge forward delay time (sec).
This command configures the
default values for forward-time.
This command configures the
bridge hello time(sec).
configure
no spanning-tree hello-time
configure
spanning-tree max-age<6-40>
configure
no spanning-tree max-age
configure
spanning-tree mode (rstp|stp)
spanning-tree pathcost method
configure
(short|long)
configure
spanning-tree priority<0-61440>
configure
no spanning-tree priority
interface
spanning-tree (disable|enable)
spanning-tree bpdufilter
interface
(disable|enable)
spanning-tree bpduguard
interface
(disable|enable)
spanning-tree rootguard
interface
(disable|enable)
spanning-tree edge-port
interface
(disable|enable)
interface
spanning-tree cost VALUE
Managed Industrial L2 Switch
This command configures the
default values for hello-time.
This command configures the
bridge message max-age time(sec).
This command configures the
default values for max-age time.
This command configures the
spanning mode.
This command configures the
pathcost method.
This command configures the
priority for the system.
This command configures the
default values for the system
priority.
This command configures
enables/disables the STP function
for the specific port.
This command configures
enables/disables the bpdufilter
function for the specific port.
This command configures
enables/disables the bpduguard
function for the specific port.
This command enables/disables the
BPDU Root guard port setting for
the specific port.
This command enables/disables the
edge port setting for the specific
port.
This command configures the cost
for the specific port.
96
Advertisement
Table of Contents
