TRENDnet TI-RG262i User Manual page 117

TRENDnet User's Guide
Ethernet Type: any
Source IP Address: any
Destination IP Address: any
Source Application: any
Destination Application: any
Note: Any: Doesn't matter.
Web Configuration
Security > Access Control List
Parameter Description
IP Type Selects IPv4 / IPv6 type for the profile.
Profile Name The access control profile name.
Action Selects Disables / Drop / Permits / DSCP action for the profile.
© Copyright 2018 TRENDnet. All Rights Reserved.
Configures the Ethernet type of the packets that you want to
Ethernet Type
filter.
VLAN Configures the VLAN of the packets that you want to filter.
Configures the source MAC of the packets that you want to
Source MAC
filter.
Configures the bitmap mask of the source MAC of the packets
that you want to filter.
Mask of Source
If the Source MAC field has been configured and this field is
MAC
empty, it means the profile will filter the one MAC configured in
Source MAC field.
Configures the destination MAC of the packets that you want to
Destination MAC
filter.
Configures the bitmap mask of the destination MAC of the
packets that you want to filter.
Mask of
If the Destination MAC field has been configured and this field
Destination MAC
is empty, it means the profile will filter the one MAC
configured in Destination MAC field.
DSCP Configure the DSCP for the profile.
802.1p Configures the 802.1p for the profile.
Source IP Configures the source IP of the packets that you want to filter.
Configures the bitmap mask of the source IP of the packets
that you want to filter.
Mask of Source IP
If the Source IP field has been configured and this field is
empty, it means the profile will filter the one IP configured in
Source IP field.
Configures the destination IP of the packets that you want to
Destination IP
filter.
Mask of
Configures the bitmap mask of the destination IP of the packets
Destination IP that you want to filter.
Managed Industrial L2 Switch
114