Multicast Address - TRENDnet TI-RG262i User Manual

Managed industrial l2 switch
Table of Contents

Advertisement

TRENDnet User's Guide
Apply
Click Apply to configure the settings.
Refresh
Click this to reset the fields to the last setting.
IGMP
Snooping
This field displays whether IGMP snooping is globally enabled or
State
disabled.
This field displays VLANs on which the Switch is to perform IGMP
IGMP
Snooping
snooping. None displays if you have not enabled IGMP snooping
VLAN State
on any port yet.
Unknown
This field displays whether the Switch is set to discard or flood
Multicast
unknown multicast packets.
Packets
Port Settings
Advanced Settings > IGMP Snooping > IGMP Snooping > Port Settings
Parameter
Description
Select the desired setting, Auto, Fixed, or Edge. Auto means
the Switch uses the port as an IGMP query port if the port
Querier Mode
receives IGMP query packets. Fixed means the Switch always
treats the port(s) as IGMP query port(s). This is for when
© Copyright 2018 TRENDnet. All Rights Reserved.
connecting an IGMP multicast server to the port(s). Edge means
the Switch does not use the port as an IGMP query port. In this
case, the Switch does not keep a record of an IGMP router
being connected to this port and the Switch does not forward
IGMP join or leave packets to this port.
Immediate
Select individual ports on which to enable immediate leave.
Leave
Configures the maximum group for the port or a range of ports.
Group Limit
Apply
Click Apply to apply the settings.
Refresh
Click this to reset the fields.
Port
The port ID.
Querier Mode
The Querier mode setting for the specific port.
Immediate Leave
The Immediate Leave setting for the specific port.
Group Counts
The current joining group count and the maximum group count.

Multicast Address

A multicast address is associated with a group of interested receivers. According to RFC
3171, addresses 224.0.0.0 to 239.255.255.255, the former Class D addresses, are
designated as multicast addresses in IPv4.
The IANA owns the OUI MAC address 01:00:5e, therefore multicast packets are delivered
by using the Ethernet MAC address range 01:00:5e:00:00:00 - 01:00:5e:7f:ff:ff. This is 23
bits of available address space.
Managed Industrial L2 Switch
56

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ti-rp262i

Table of Contents