TRENDnet TI-RG262i User Manual page 35

TRENDnet User's Guide
Wednesday | Thursday |
Friday | Saturday) MONTH
OCLOCK
configure time daylight-saving-time
end-date (first | second |
third | fourth | last) (Sunday
| Monday | Tuesday |
Wednesday | Thursday |
Friday | Saturday) MONTH
OCLOCK
configure no time daylight-saving-time
configure time ntp-server IP_ADDRESS
configure no time ntp-server
configure time timezone VALUE
Example:
[DEVICE_NAME](config)#time ntp-server 192.5.41.41
[DEVICE_NAME](config)#time timezone +0800
[DEVICE_NAME](config)#time ntp-server enable
[DEVICE_NAME](config)#time daylight-saving-time start-date first Monday 6 0
[DEVICE_NAME](config)#time daylight-saving-time end-date last Saturday 10 0
© Copyright 2018 TRENDnet. All Rights Reserved.
This command sets the end date for
the Daylight Saving Time.
For Example: Last Sunday 10 18 (PM: 6
Last Sunday in October)
This command disables daylight saving
on the Switch.
This command sets the IP address of
your time server.
This command disables the NTP server
settings.
Selects the time difference between
UTC (formerly known as GMT) and your
time zone.
Valid value: -1200 to 1200.
Web Configuration
Basic Settings > General Settings > SNTP
Parameter Description
Current Time and Date
Current Time This field displays the time you open / refresh this menu.
Current Date This field displays the date you open / refresh this menu.
Time and Date Setting
Select this option if you want to enter the system date and time
Manual
manually.
Managed Industrial L2 Switch
32