TRENDnet TI-RG262i User Manual page 10

TRENDnet User's Guide
ALM DIP Switches
Switch Status Function
1 OFF Disable alarm relay for PWR power input
ON Enable alarm relay for power failure on PWR power input
2 OFF Disable alarm relay for RPS power input
ON Enable alarm relay for power failure on RPS power input
3 OFF Storm control managed by switch configuration
ON Enable storm control (Broadcast and DLF rate set to 300pps)
Takes precedence over storm control switch configuration
4 OFF 802.1p QoS managed by switch configuration
ON Enable 802.1p QoS on ports 1 and 2 (Set CoS priority to tag 4
on ports 1 and 2)
Takes precedence over 802.1p QoS switch configuration
5 OFF Port 9 SFP set to Gigabit speed full duplex
ON Port 9 SFP set to 100Mbps speed full duplex
6 OFF Port 10 SFP set to Gigabit speed full duplex
ON Port 10 SFP set to 100Mbps speed full duplex
© Copyright 2020 TRENDnet. All Rights Reserved.
Managed Industrial L2 Switches
7