Table of Contents
Advertisement
TRENDnet User's Guide
Default Settings
The port security on the Switch is disabled.
The Maximum MAC per port is 5.
The port state of the port security is disabled.
CLI Configuration
Node
Command
enable
show port-security
configure
port-security (disable|enable)
interface
port-security (disable|enable)
interface
port-security limit VALUE
configure
interface range
gigabitethernet1/0/ PORTLISTS
if-range
port-security (disable|enable)
if-range
port-security limit VALUE
© Copyright 2018 TRENDnet. All Rights Reserved.
Description
This command displays the current
port security configurations.
This command enables / disables
the global port security function.
This command enables / disables
the port security function on the
specific port.
This command configures the
maximum MAC entries on the
specific port.
This command enters the interface
configure node.
This command enables / disables
the port security function for the
specified ports
This command configures the
maximum MAC entries for the
specified ports.
Web Configuration
Security > Port Security
Parameter
Description
Port Security Settings
Port Security
Select Enable/Disable to permit Port Security on the Switch.
Port
Select a port number to configure.
State
Select Enable/Disable to permit Port Security on the port.
The maximum number of MAC addresses allowed per interface.
Maximum MAC
The acceptable range is 1 to 30.
Port Security Status
Port
This field displays a port number.
State
This field displays if Port Security is Enabled or Disabled
Maximum MAC
This field displays the maximum number of MAC addresses
Managed Industrial L2 Switch
121
Advertisement
Table of Contents
