Table of Contents
Advertisement
TRENDnet User's Guide
configure
mail-alarm trap-event
(reboot|link-
change|config.|
firmware|login|port-
blocked| alarm)
(disable|enable)
Web Configuration
Management > Mail Alarm
Parameter
Description
State
Enable / disable the Mail Alarm function.
Server IP
Specifies the mail server's IP address.
Server Port
Specifies the TCP port for the SMTP.
Account Name
Specifies the mail account name.
Account Password
Specifies the mail account password.
Mail From
Specifies the mail sender.
Mail To
Specifies the mail receiver.
Trap State
Enables / disables the mail trap event states.
© Copyright 2018 TRENDnet. All Rights Reserved.
This command disables / enables mail
trap events.
Managed Industrial L2 Switch
133
Advertisement
Table of Contents
