Dhcp Relay - TRENDnet TI-RG262i User Manual

TRENDnet User's Guide
Web Configuration
Advanced Settings > DHCP Options
Parameter Description
State
Select this option to enable / disable the DHCP option 82 on the
Switch.
The frame ID for the circuit sub-option.
Circuit Frame
Circuit Shelf The shelf ID for the circuit sub-option.
Circuit Slot The slot ID for the circuit sub-option.
© Copyright 2018 TRENDnet. All Rights Reserved.
The String of the circuit ID sub-option information.
Circuit-ID String
Remote-ID String The String of the remote ID sub-option information.
Apply Click Apply to save your changes to the Switch.
Refresh Click Refresh to begin configuring this screen afresh.
DHCP Option 82 Port Settings
Port The Port ID.
The String of the circuit ID sub-option information for the specific
Curcuit-ID String
port.
The String of the remote ID sub-option information for the
Remote-ID String
specific port.
DHCP Option 82 Port Status
The field displays all of the ports' configurations.

DHCP Relay

Because the DHCPDISCOVER message is a broadcast message, and broadcasts only cross
other segments when they are explicitly routed, you might have to configure a DHCP
Relay Agent on the router interface so that all DHCPDISCOVER messages can be
forwarded to your DHCP server. Alternatively, you can configure the router to forward
DHCP messages and BOOTP message. In a routed network, you would need DHCP Relay
Agents if you plan to implement only one DHCP server.
The DHCP Relay that either a host or an IP router that listens for DHCP client messages
being broadcast on a subnet and then forwards those DHCP messages directly to a
configured DHCP server. The DHCP server sends DHCP response messages directly back
to the DHCP relay agent, which then forwards them to the DHCP client. The DHCP
administrator uses DHCP relay agents to centralize DHCP servers, avoiding the need for a
DHCP server on each subnet.
Managed Industrial L2 Switch
68