TRENDnet TI-RG262i User Manual page 77

TRENDnet User's Guide
erps-ring left-port PORTID type
[owner|neighbor|normal]
erps-ring mel VALUE
erps-ring name STRING
erps-ring revertive
erps-ring no revertive
erps-ring right-port PORTID type
[owner|neighbor|normal]
erps-ring ring enable
erps-ring no ring enable
erps-ring version
erps-ring wtr-timer
config- instance INSTANCE_ID
erps-inst control-vlan VLAN_ID
data-vlan VLAN_ID
config- no instance INSTANCE_ID
erps-inst
config- show
erps-inst
© Copyright 2018 TRENDnet. All Rights Reserved.
This command configures the left port and
type for the ERPS ring.
This command configures a Control MEL
for the ERPS ring.
This command configures a name for the
ERPS ring.
This command configures the revertive
mode for the ERPS ring.
This command configures the non-
revertive mode for the ERPS ring.
This command configures the right port
and type for the ERPS ring.
This command enables the ring.
This command disables the ring.
This command configures a version for the
ERPS ring.
This command configures the WTR Timer
for the ERPS ring. (default: 5 minutes)
This command configures a new instance
and specifies its control vlan and data vlan.
This command removes an instance.
This command displays all of the instance
configurations.
Web Configuration
Ring Settings
Advanced Settings > ERPS > Ring Settings
Parameter Description
Global State Enables / disables the global ERPS state.
Ring ID Configures the ring ID. The Valid value is from 1 to 255.
State Enables/ disables the ring state.
Ring Name Configures the ring name.(Up to 32 characters)
Revertive Enables / disables the revertive mode.
Configures the instance for the ring. The Valid value is from 0 to
30. 0-Disable means the ERPS is running in version 1. The
Instance
control VLAN of the instance should be same as below Control
VLAN.
Managed Industrial L2 Switch
74