Table of Contents
Advertisement
TRENDnet User's Guide
CLI Configuration
Node
Command
enable
show dot1x
enable
show dot1x username
enable
show dot1x accounting-record
configure
dot1x authentication
(disable|enable)
configure
dot1x authenticmethod
(local|radius)
configure
no dot1x authenticmethod
configure
dot1x radius primaryserver-ip
<IP> port PORTID
configure
dot1x radius primaryserver-ip
<IP> port PORTID key KEY
configure
dot1x radius secondary-server-ip
<IP> port PORTID
configure
dot1x radius secondary-server-ip
<IP> port PORTID key KEY
configure
no dot1x radius secondary-
server-ip
configure
dot1x username <STRING>
passwd <STRING>
configure
no dot1x username <STRING>
© Copyright 2018 TRENDnet. All Rights Reserved.
Description
This command displays the current
802.1x configurations.
This command displays the current
user accounts for the local
authentication.
This command displays the local
accounting records.
This command enables/disables the
802.1x authentication on the
switch.
This command configures the
authentic method of 802.1x.
This command configures the
authentic method of 802.1x to
default.
This command configures the
primary radius server.
This command configures the
primary radius server.
This command configures the
secondary radius server.
This command configures the
secondary radius server.
This command removes the
secondary radius server.
This command configures the user
account for local authentication.
This command deletes the user
account for local authentication.
configure
dot1x accounting
(disable|enable)
configure
dot1x guest-vlan VLANID
configure
no dot1x guest-vlan
interface
dot1x admin-controldirection
(both|in)
interface
dot1x default
interface
dot1x max-req <1-10>
interface
dot1x port-control (auto |
forceauthorized |
forceunauthorized)
interface
dot1x authentication
(disable|enable)
interface
dot1x reauthentication
(disable|enable)
interface
dot1x timeout quietperiod
interface
dot1x timeout servertimeout
interface
dot1x timeout reauthperiod
interface
dot1x timeout supptimeout
interface
dot1x guest-vlan
(disable|enable)
Managed Industrial L2 Switch
This command enables/disables the
dot1x local accounting records.
This command configures the guest
vlan.
This command removes the guest
vlan.
This command configures the
control direction for blocking
packets.
This command sets the port
configuration to default settings.
This command sets the max-req
times of a port. (1~10).
This command configures the port
control mode on the port.
This command enables/disables the
802.1x on the port.
This command enables/disables
reauthentication on the port.
This command configures the quiet-
period value on the port.
This command configures the
server-timeout value on the port.
This command configures the re-
auth-period value on the port.
This command configures the supp-
timeout value on the port.
This command configures the
802.1x state on the port.
117
Advertisement
Table of Contents
