Table of Contents
Advertisement
TRENDnet User's Guide
Manual Registration
Management > Device Management > Manual Registration
If devices do not support LLDP and ONVIF, user has to enter the details of it by manually
under manual registration. The function supports three type, IP-Cam, PLC and Switch.
For devices which do not support ONVIF or LLDP, User can input the device's MAC
address and then the Switch will discover the device and display it on the
Topology/Netlite Map in the Topology map web GUI page.
Node
Command
enable
show netlite-device
This command displays the netlite-device whose
MAC are manually entered
configure
netlite-device type
This command adds a MAC address of an IP-cam to
ipcam mac
display on netlite.
configure
netlite-device type
This command adds a MAC address of a PLC to
plc mac
display on netlite.
configure
netlite-device type
This command binds the MAC address to a
switch mac
particular port
configure
no netlite-device
This command removes device from netlite..
mac
© Copyright 2018 TRENDnet. All Rights Reserved.
Description
Web Configuration
Management > Device Management > Manual Registration
Parameter
Description
Select the type of device to display on Topology/Netlite map. IP-
Type
Cam, PLC, or Switch.
Enter the MAC address of the device to add to the topology map.
MAC Address
(00:11:22:aa:bb:cc)
Managed Industrial L2 Switch
142
Advertisement
Table of Contents
