TRENDnet TI-RG262i User Manual page 92

TRENDnet User's Guide
Web Configuration
Advanced Settings > PoE > Configuration
Parameter Description
Selects the PoE mode, classification or consumption.
Classification - Allocated power according to class (0 to 4).
PoE Mode
Consumption - Allocated power according to the actual need of
each PD.
Selects a port or a range of ports that you want to configure
Port
the PoE function.
Selects Enable to enable the PoE function on the specific port.
State
Selects Disable to disable the PoE function on the specific port.
Priority Selects Critical / High / Low priority for the specific port.
© Copyright 2018 TRENDnet. All Rights Reserved.
Click Apply to take effect the settings.
Apply
Click Refresh to begin configuring this screen afresh.
Refresh
PoE Mode Displays the current PoE mode.
Total Power Displays the total power that the Switch supports.
Total Consuming
Displays the total consuming power for all of the PDs.
Power
External Power
Displays the status of the external power module.
Module
Port Display the Port No.
State Displays the PoE state for the specific port.
PD Priority
Displays the PoE priority for the specific port.
Class The field displays the class mode which the PSE negotiate with
the PD on the specific port.
Consuming
Displays the consuming power for the specific port.
Power(mW)
Power
Displays the power allocated for the specific port.
Allocated(mW)
Current
Displays the current status for the specific port.
Status(mA)
Managed Industrial L2 Switch
89