Table of Contents
Advertisement
TRENDnet User's Guide
Web Configuration
Management > Maintenance > Server
Parameter
Description
Server Settings
Web Server State
Selects Enable or Disable to enable or disable the Web service.
Selects Enable or Disable to enable or disable the Telnet
Telnet Server State
service.
SSH Server State
Selects Enable or Disable to enable or disable the SSH service.
Apply
Click Apply to configure the settings.
Refresh
Click this button to reset the fields to the last setting.
Server Status
Web Server Status
Displays the current Web service status.
Telnet Server Status
Displays the current Telnet service status.
SSH Server Status
Displays the current SSH service status.
© Copyright 2018 TRENDnet. All Rights Reserved.
Reboot
Management > Maintenance > Reboot
Reboot allows you to restart the Switch without physically turning the power off.
Follow the steps below to reboot the Switch.
⚫
In the Reboot screen, click the Reboot button. The following screen displays.
⚫
Click OK again and then wait for the Switch to restart. This takes up to two minutes.
This does not affect the Switch's configuration.
Managed Industrial L2 Switch
136
Advertisement
Table of Contents
