TRENDnet User's Guide
TI-G102i
LED Indicators
IP30 Rated
Housing
Gigabit
RJ-45 ports
Gigabit
SFP Slots
© Copyright 2020 TRENDnet. All Rights Reserved.
Front View
10/100/1000
Mbps per port
LED indicator
LINK/ACT per
port LED
indicator
Managed Industrial L2 Switches
•
Ports 1-8 – Designed to operate at 10Mbps, 100Mbps, or Gigabit speed in both
half-duplex and full-duplex transfer modes. Supports Auto MDI-X.
•
SFP Slot 9-10 – Designed to operate at Gigabit or 100Mbps speeds.
•
Reset Button – Push the button for 3 seconds and release to reset to factory
defaults.
•
Grounding point/screw – The switch chassis can also be connected to a known
ground point for additional safety and protection. (grounding wire not
included)
11