Table of Contents
Advertisement
TRENDnet User's Guide
Priority
Configures the priority for the specific port.
Configures the port type for the specific port. Edge or Non-
Edge Port
Edge.
BPDU Filter
Enables/Disables the BPDU filter function for the specific port.
BPDU Guard
Enables/Disables the BPDU guard function for the specific port.
Enables/Disables the BPDU root guard function for the specific
ROOT Guard
port.
Port Status
Active
The state of the STP function.
The port role. Should be one of the Alternated / Designated /
Role
Root / Backup / None.
The port's status. Should be one of the Discarding / Blocking /
Status
Listening / Learning / Forwarding / Disabled.
Path Cost
The port's path cost.
Priority
The port's priority.
Edge Port
The state of the edge function.
BPDU Filter
The state of the BPDU filter function.
BPDU Guard
The state of the BPDU guard function.
ROOT Guard
The state of the BPDU Root guard function.
© Copyright 2018 TRENDnet. All Rights Reserved.
STP Status
Advanced Settings > STP > STP Status
Parameter
Description
Current Root Status
MAC address
This is the MAC address of the root bridge.
Root refers to the base of the spanning tree (the root bridge).
Priority
This field displays the root bridge's priority. This Switch may
also be the root bridge.
This is the maximum time (in seconds) the Switch can wait
MAX Age
without receiving a configuration message before attempting
to reconfigure.
This is the time interval (in seconds) at which the root switch
Hello Time
transmits a configuration message. The root bridge
determines Hello Time, Max Age and Forwarding Delay.
This is the time (in seconds) the root switch will wait before
Forward Delay
changing states.
Current Bridge Status
MAC address
This is the MAC address of the current bridge.
Priority is used in determining the root switch, root port and
Priority
designated port. The switch with the highest priority (lowest
numeric value) becomes the STP root switch. If all switches
Managed Industrial L2 Switch
99
Advertisement
Table of Contents
