TRENDnet TI-RG262i User Manual page 54

TRENDnet User's Guide
CLI Configuration
Node Command
enable show storm-control
configure storm-control rate RATE_LIMIT
type (bcast | mcast | DLF |
bcast+mcast | bcast+DLF |
mcast+DLF | bcast+mcast+DLF)
ports PORTLISTS
no storm-control type (bcast |
configure
mcast | DLF | bcast+mcast |
bcast+DLF | mcast+DLF |
bcast+mcast+DLF) ports
PORTLISTS
Example:
[DEVICE_NAME]#configure terminal
[DEVICE_NAME](config)#storm-control rate 1 type broadcast ports 1-6
[DEVICE_NAME](config)#storm-control rate 1 type multicast ports 1-6
[DEVICE_NAME](config)#storm-control rate 1 type DLF ports 1-6
© Copyright 2018 TRENDnet. All Rights Reserved.
Description
This command displays the current
storm control configurations.
This command enables the
bandwidth limit for broadcast or
multicast or DLF packets and set
the limitation.
This command disables the
bandwidth limit for broadcast or
multicast or DLF packets.
Web Configuration
Advanced Settings > Bandwidth Control > Rate Limitation > Storm Control
Parameter Description
Select the port number for which you want to configure storm control
Port
settings.
Select the number of packets (of the type specified in the Type field) per
Rate
second the Switch can receive per second.
Select Broadcast - to specify a limit for the amount of broadcast packets
received per second.
Multicast - to specify a limit for the amount of multicast packets
Type
received per second.
DLF - to specify a limit for the amount of DLF packets received per
second.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
Bandwidth Limitation
Managed Industrial L2 Switch
51