僅 High Beam Assist (Hba) - Kia Sorento 2023 Manual

Features of your vehicle
Detecting sensor
Front view camera
OMQ4033098
The front view camera is used as a
detecting sensor to detect ambient light
and brightness whilst driving. Refer to
the picture above for the detailed loca-
tion of the detecting sensor.
NOTICE
僅 Always keep the front view camera in
good condition to maintain optimal
performance of High Beam Assist.
僅 For more details on the precautions of
the front view camera, refer to"For-
ward Collision-Avoidance Assist (FCA)
(Sensor Fusion)" on page 6-4.
High Beam Assist setting
With the ENGINE START/STOP button in
the ON position, select Setup → Vehicle
→ Lights → High Beam Assistfrom the
Settings menu to turn on High Beam
Assist function.
WARNING
For your safety, change the Settings
after parking the vehicle at a safe loca-
tion.
High Beam Assist operation
僅 After selecting 'High Beam Assist' in
the Settings menu, High Beam Assist
will operate by following the proce-
dure below.
- Place the headlamp switch in the
AUTO position and push the head-
4 106
lamp lever towards the instrument
cluster. The High Beam Assist (
indicator light will appear on the
cluster and the function will be
enabled.
- When the function is enabled, high
beam will turn on when vehicle
speed is above 30 km/h (20 mph).
When vehicle speed is below 20km/
h (12 mph), high beam will not turn
on.
- The High Beam (
light will appear on the cluster
when high beam is on.
僅 When High Beam Assist is operating,
if the headlamp lever or switch is
used, the function operates as follow:
- If the headlamp lever is pulled
towards you when the high beam is
off, the high beam will turn on with-
out High Beam Assist cancelled.
When you let go of the headlamp
lever, the lever will move to the
middle and the high beam will turn
off.
- If you push the light switch towards
the instrument cluster, high beam is
turned on and High Beam Assist is
released.
- If the headlamp switch is placed
from AUTO to another position
(headlamp/position/off), High
Beam Assist will turn off and the
corresponding lamp will turn on.
僅 When High Beam Assist is operating,
high beam switches to low beam if
any of the following conditions occur:
- When the headlamp of an oncom-
ing vehicle is detected.
- When the tail lamp of a vehicle in
front is detected.
Lighting
)
) indicator