僅 Replacing Rear Wiper Blade - Kia Sorento 2023 Manual

Maintenance
3. Install the new blade assembly.
OMQ4073111
4. Return the wiper arm on the wind-
screen.
5. Turn ignition to the ON position and
wiper arms will return to the normal
operating position.
Replacing rear wiper blade
OMQ4073030
Move the rear wiper to the bottom mid-
dle part, and lift up the wiper arm. Pull
the wiper blade to remove it.
1. Within 20 seconds after the vehicle
ignition is OFF, move the wiper lever
to MIST/1x position for over 2 seconds
until the wiper moves down to the
bottom middle part.
2. Raise the wiper arm and pull out the
wiper blade assembly.
OMQ4073031
8 40
3. Lift up the wiper blade, and pull the
blade to remove it.
ONQ5061126N
4. Install the new blade assembly by
inserting the centre part into the slot
in the wiper arm until it clicks into
place.
ONQ5061127N
If the replacement is complete, put
down the wiper arm to place it on the
rear windscreen, and turn the vehicle
ignition to ON and operate the wipers
to check the blade is installed cor-
rectly.
5. Make sure the blade assembly is
installed firmly by trying to pull it
slightly.
To prevent damage to the wiper arms or
other components, have the wiper blade
replaced by a professional workshop.
Kia recommends to visit an authorised
Kia dealer/service partner.
CAUTION
If the wiper arm receives too much force
whilst pulling the blade, the centre part
may be damaged.
Wiper blades