Kia Sorento 2023 Manual page 601

Maintenance
Replacing headlamp (Low beam /
High beam), position lamp / day-
time running lamp, turn signal
lamp (LED type)
Type A
OMQ4073082
Type B
OMQ4073083L
If the head lamp LED (1,2), daytime run-
ning lamp LED (3) and turn signal lamp
LED (4,5) does not operate, have your
vehicle checked by a professional work-
shop. Kia recommends to visit an autho-
rised Kia dealer/service partner.
Replacing front turn signal lamp
(Bulb type)
OMQ4073081
1. Turn off vehicle and disconnect the
negative terminal from the battery.
2. Remove the socket (A) from the
assembly by turning the socket coun-
terclockwise until the tabs on the
socket align with the slots on the
assembly.
3. Remove the bulb (B) from the socket
(A) by pressing it in and rotating it
counterclockwise until the tabs on the
bulb align with the slots in the socket.
Pull the bulb out of the socket
4. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
5. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
6. Connect the negative terminal from
the battery.
Replacing front fog lamp (LED
type)
OMQ4073084
If the front fog lamp (6) does not oper-
ate, have your vehicle checked by a pro-
fessional workshop. Kia recommends to
visit an authorised Kia dealer/service
partner.
Light bulbs
8
8 67