Kia Sorento 2023 Manual page 157

Features of your vehicle
NOTICE
僅 Be sure to adjust the Digital Centre
Mirror before driving.
- Switch the system to the conven-
tional rearview mirror mode and be
properly seated on the driver's seat.
Then adjust the mirror so as to see
the rear window properly.
- Push the lever all the way to
change to digital mirror mode and
adjust the display settings. Driving
without adjusting the mirror may
cause difficulty in watching the dis-
play at the Digital Mirror mode
(camera view mode) due to the
reflection from the surface of the
mirror.
- As the range of the image display
by the Digital Centre Mirror is dif-
ferent from that of the optical mir-
ror, make sure to check.
僅 If the Digital Centre Mirror malfunc-
tion, immediately switch the system to
the conventional rearview mirror
mode.
僅 When strong light (for example, sun-
light or high beams from following
vehicles) enters the camera, a light
beam or a glaring light may appear on
the monitor screen of the Digital Cen-
tre Mirror. In that case, switch the sys-
tem to the conventional rearview
mirror mode appropriately.
僅 If the camera lens (1) is dirty, the dis-
played image may not be clear. In this
case, clean it with a soft cloth damp-
ened with water or a swab.
OMQ4033059
System component
OON042510
1 Icon display area
Displays icons, adjusting Brightness &
Tilt
2 Lever
Operate to change between digital
mirror mode and optical mirror mode.
3 Menu button
Press to display the icon display area
and select the item you want to adjust
(Brightness & Tilt).
4 Select/adjust button
Press to change the setting of the
item you want to adjust.
5 Camera indicator
Indicates that the camera is operating
normally.
6 HomeLink buttons
For the operation of the "HomeLink씾
Universal Transceiver".
Mirrors
4
4 65