Table of Contents
Advertisement
Features of your vehicle
They will self-cancel after a turn is
completed. If the indicator continues
to flash after a turn, manually return
the lever to the OFF position.
To signal a lane change:
僅 Move the turn signal lever slightly and
hold it in position (B).
The lever will return to the OFF posi -
tion when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned out
and will require replacement.
One-touch lane change function
To activate a one-touch lane change
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3, 5 or 7 times.
You can activate or deactivate the One
Touch Turn Signal function or choose
the number of blinks (3, 5, or 7) by
selecting "Vehicle →Lights → One Touch
Turn Signal".
NOTICE
If an indicator flash is abnormally quick
or slow, a bulb may be burned out or
have a poor electrical connection in the
circuit. The bulb may need to be
replaced.
INFORMATION
The infotainment system may change
after software updates. For more infor -
mation, refer to the user's manual pro -
vided in the infotainment system and
the quick reference guide.
High Beam Assist (HBA)
OMV033073
High Beam Assist is a function that auto -
matically adjusts the headlamp range
(switches between high beam and low
beam) depending on the brightness of
detected vehicles and certain road con -
ditions.
Detecting sensor
Front view camera
OMV033074N
The front view camera is used as a
detecting sensor to detect ambient light
and brightness while driving.
Refer to the picture above for the
detailed location of the detecting sensor.
NOTICE
僅 Always keep the front view camera in
good condition to maintain optimal
performance of HBA.
僅 For more details on the precautions of
the front view camera, refer to "For -
ward Collision-Avoidance Assist (FCA)
(Sensor Fusion)" on page 7-4.
Lighting
5
5
115
Advertisement
Chapters
Table of Contents
