僅 Replacing Rear Fog Lamp (Led Type); 僅 Replacing High Mounted Stop Lamp (Led Type); 僅 Replacing License Plate Lamp (Led Type) - Kia Sorento 2023 Manual

Hide thumbs Also See for Sorento 2023:
Table of Contents

Advertisement

Maintenance
1. Turn off vehicle and disconnect the
negative terminal from the battery.
2. Remove the plastic tabs with a flat-tip
screw driver.
3. Loosen the plastic retaining screws
and remove the under panel cover.
4. Disconnect the rear back up lamp
connector (A).
5. Remove the socket from the assembly
by turning the socket counterclock-
wise until the tabs on the socket align
with the slots on the assembly.
6. Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
7. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
8. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
9. Connect the rear back up lamp con-
nector.
10.Tighten the plastic retaining screws.
11.Install the plastic tabs and the under
panel cover.
Replacing rear fog lamp (LED
type)
OMQ4073065
If the rear fog lamp (1) does not operate,
have your vehicle checked by a profes-
sional workshop. Kia recommends to
8
70
visit an authorised Kia dealer/service
partner. The LED lamp cannot be
replaced as a single unit because it is an
integrated unit. The LED lamp has to be
replaced with the unit. A skilled techni-
cian should check or repair the stop and
tail lamp (LED), for it may damage
related parts of the vehicle.
Replacing high mounted stop
lamp (LED type)
OMQ4073066
If the high mounted stop lamp (LED) (1)
does not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an authorised
Kia dealer/service partner.
The LED lamp cannot be replaced as a
single unit because it is an integrated
unit. The LED lamp has to be replaced
with the unit.
A skilled technician should check or
repair the high mounted stop lamp
(LED), for it may damage related parts of
the vehicle.
Replacing license plate lamp (LED
type)
OMQ4073067
If the license plate lamp does not oper-
ate, we recommend that the system be
checked by a professional workshop. Kia
Light bulbs

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents