Kia Sorento 2023 Manual page 352

Driver assistance system
Front radar
OMQ4053006
Front corner radar (if equipped)
OMQ4053179
Rear corner radar (if equipped)
OMQ4053013
Refer to the picture above for the
detailed location of the detecting sen-
sors.
CAUTION
僅 Never disassemble the detecting sen-
sor or sensor assembly, or cause any
damage to it.
僅 If the detecting sensors have been
replaced or repaired, have the vehicle
inspected by a professional workshop.
Kia recommends that you visit an
authorised Kia dealer/service partner.
僅 If the radar or around the radar expe-
riences an impact, Forward Collision-
Avoidance Assist may not operate
properly even if a warning message is
not displayed on the cluster. Kia rec-
ommends that you visit an authorised
Kia dealer/service partner.
6 6
Forward Collision-Avoidance Assist (FCA) (Sensor Fusion)
僅 Never install any accessories or stick-
ers on the front windscreen, or tint the
front windscreen.
僅 Pay extreme caution to keep the front
view camera dry.
僅 Never place any reflective objects (for
example, white paper, mirror) over the
instrument panel.
僅 Do not place any objects near the
front windscreen or install any acces-
sories on the front windscreen. It can
affect the performance of the defog-
ging and defrosting function of the cli-
mate control system, which may
prevent the Driver Assistance systems
from operating.
僅 Do not apply license plate frame or
objects, such as a bumper sticker, film
or a bumper guard, near the front
radar cover.
僅 Always keep the front radar and cover
clean and free of dirt and debris.
Use only a soft cloth to wash the vehi-
cle. Do not spray pressurized water
directly on the sensor or sensor cover.
僅 The genuine Kia front/front corner/
rear corner radar sensor covers are
parts with quality and performance
ensured. If arbitrarily applying paint
on or changing the cover, Forward
Collision-Avoidance Assist may not
function properly.
Use only Kia Genuine Parts or those
of an equivalent standard with proven
quality and performance to repair or
replace the radar sensor covers.
僅 The function may not work properly
when the bumper has been replaced,
or the surroundings of the front cor-
ner radar or rear corner radar has
been damaged or paint has been
applied.