僅 Operating High Beam - Kia Sorento 2023 Manual

Features of your vehicle
Auto light
OMQ4033401_2
When the light switch is in the AUTO
light position, the taillights and head-
lights will turn ON or OFF automatically
depending on the amount of light out-
side the vehicle.
CAUTION
僅 Never place anything over the sensor
(1) located on the instrument panel as
this will ensure better auto-light sys-
tem control.
僅 Don't clean the sensor using a window
cleaner, the cleaner may leave a light
film which could interfere with sensor
operation.
僅 If your vehicle has window tint or
other types of metallic coating on the
front windscreen, the Auto light sys-
tem may not work properly.
Operating high beam
OMQ4033405R
To turn on the high beam headlamp:
僅 Push the lever away from you.
The lever will return to its original
position.
The high beam indicator will light
when the headlight high beams are
switched on.
4 104
WARNING
Do not use high beam when there are
other vehicles. Using high beam could
obstruct the other driver's vision.
To flash the headlights:
僅 Pull the lever towards you.
OMQ4033404R
It will return to the normal (low beam)
position when released. The head-
light switch does not need to be on to
use this flashing feature.
Operating turn signals and lane
change signals
OMQ4033406R
The ENGINE START/STOP button must
be on for the turn signals to function.
To turn on the turn signals:
僅 Move the lever up or down (A).
The green arrow indicators on the
instrument panel indicate which turn
signal is operating.
They will self-cancel after a turn is
completed. If the indicator continues
to flash after a turn, manually return
the lever to the OFF position.
To signal a lane change:
僅 Move the turn signal lever slightly and
hold it in position (B).
Lighting