僅 Operating Front Fog Light; 僅 Operating Rear Fog Light - Kia Sorento 2023 Manual

Features of your vehicle
The lever will return to the OFF posi-
tion when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned out
and will require replacement.
One-touch lane change function
To activate a one-touch lane change
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3, 5 or 7 times.
You can activate or deactivate the One
Touch Turn Signal function or choose
the number of blinking (3, 5, or 7) by
selecting "User Settings →Lights → One
Touch Turn signal".
NOTICE
If an indicator flash is abnormally quick
or slow, a bulb may be burned out or
have a poor electrical connection in the
circuit.
Operating front fog light
equipped)
Fog lights are designed to provide
improved visibility when visibility is poor
due to fog, rain or snow, etc.
OMQ4033407R
The fog lights will turn on when the fog
light switch (1) is turned to the on posi-
tion after the headlight is turned on.
To turn off the fog lights:
僅 Turn the fog light switch (1) to the ON
position.
CAUTION
When in operation, the fog lights con-
sume large amounts of vehicle electrical
power. Only use the fog lights when visi-
bility is poor.
Operating rear fog light
equipped)
To turn the rear fog lights on, turn the
rear fog light switch (1) to the on position
when the headlight is turned on.
Also, the rear fog lights turn on when the
rear fog light switch is turned on after
the front fog light switch (if equipped) is
turned on and the headlight switch is in
the parklight position.
(if
To turn the rear fog lights off:
僅 Turn the rear fog light switch to the on
position again.
High Beam Assist (HBA) (if
equipped)
High Beam Assist is a function that auto-
matically adjusts the headlamp range
(switches between high beam and low
beam) depending on the brightness of
detected vehicles and certain road con-
ditions.
Lighting
(if
OMQ4033513L
OMQ4033408R
4
4
105