Kia Sorento 2023 Manual page 104

Features of your vehicle
Armed stage
Theft Alarm System goes to Armed
stage after 30 seconds from the doors
are locked by switch on a Outside Door
Handle/by a lock button on the Key.
Using the smart key
Park the vehicle and stop the engine.
Arm the system as described below.
1. Turn off the engine.
2. Make sure that all doors (and tailgate)
and the engine bonnet are closed and
latched.
3. Do one of the following:
僅 Lock the doors by pressing the but-
ton of the front outside door handle
with the smart key in your posses-
sion. After completion of the steps
above, the hazard warning lights
operate once to indicate that the
system is armed. If any door
remains open, the doors won't lock
and the chime will sound for 3 sec-
onds. Close the door and try again
to lock the doors. If tailgate or
engine bonnet remains open, the
hazard warning lights won't oper-
ate and theft-alarm will not arm.
After this, if the tailgate and engine
bonnet are closed, the hazard
warning lights will blink once.
僅 Lock the doors by pressing the but-
ton of the front outside door handle
with the smart key in your posses-
sion. After completion of the steps
above, the hazard warning lights
operate once to indicate that the
system is armed. If any door
remains open, the doors won't lock
and the chime will sound for 3 sec-
onds. Close the door and try again
to lock the doors. If tailgate or
engine bonnet remains open, the
4 12
hazard warning lights won't oper-
ate and theft-alarm will not arm.
After this, if the tailgate and engine
bonnet are closed, the hazard
warning lights will blink once.
僅 Lock the doors by pressing the lock
button on the smart key. After com-
pletion of the steps above, the haz-
ard warning lights will operate once
to indicate that the system is
armed. If any door (and tailgate) or
engine bonnet remains open, the
hazard warning lights won't oper-
ate and theft-alarm will not arm.
After this, if all doors (and tailgate)
and engine bonnet are closed, the
hazard warning lights blink once.
Using the remote key
Park the vehicle and stop the engine.
Arm the system as described below.
1. Turn off the engine and remove the
ignition key from the ignition switch.
2. Make sure that all doors (and tailgate),
the engine bonnet are closed and
latched.
3. Lock the doors by pressing the lock
button on the remote key. After com-
pletion of the steps above, the hazard
warning lights will blink once to indi-
cate that the system is armed. If any
door (and tailgate) or engine bonnet
remains open, the hazard warning
lights won't operate and theft-alarm
will not arm. After this, if all doors (and
tailgate) and engine bonnet are
closed, the hazard warning lights blink
once.
Keys