Kia Sorento 2023 Manual page 36

Hide thumbs Also See for Sorento 2023:
Table of Contents

Advertisement

Safety features of your vehicle
CAUTION
Check the occupants or other cargo in
the luggage area before operating the
relaxion comfort seat. Operate after
securing sufficient clearance from the
instrument panel or rear seatback.
Operating relaxion comfort seat
OMQ4023014R_2
僅 Press the rear portion of the relaxion
comfort seat switch (2) for more than
approximately 1 second to move to
the relaxation comfort seat position.
僅 If the relaxion comfort seat is operat-
ing, press the following buttons to
stop the operation.
- Seat adjustment switch (reclining,
cushion height)
- Passenger seat walk-in switch
- Relaxion comfort seat switch
僅 After operating the relaxation comfort
seat, you can adjust it for a more com-
fortable posture using the seat adjust-
ment switch.
Non-operating condition(s)
僅 When the vehicle is in R (Reverse)/N
(Neutral)/D (Drive) position (Driver's
seat)
3
12
僅 When the vehicle speed is above 3
km/h (2 mph) (Driver's seat)
僅 When the driver position memory sys-
tem needs initialization
Returning relaxion comfort seat
僅 Whilst the seat is in the relaxion com-
fort seat position, press the front por-
tion of the relaxion comfort seat
switch (1) for more than approxi-
mately 1 second.
僅 The seat cushion and seatback are
returned to their original positions in
the reverse order of the relaxion seat
operation.
- Driver's seat: Seat position when
the last shift position is in P (Park)
- Passenger's seat: Stored seat posi-
tion (initial set position)
CAUTION
Do not operate both switches at the
same time. It may damage the relaxion
comfort seat system.
NOTICE
Saving the return position of the pas-
senger seat
To save the current passenger seat posi-
tion as the return position, adjust the
passenger seat to the desired position,
and then press the front side (1) of the
relaxion switch located at the bottom of
the seat cushion 3 times within a 2-sec-
ond period. This will save the current
position as the return position.
Non-operating condition(s)
僅 When the vehicle is in R (Reverse)/N
(Neutral)/D (Drive) position (Driver's
seat)
Seat

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents