Figure 7-9 Menu 15.1.1.1 - Editing/Configuring An Individual Rule In A Set; Table 7-6 Menu 15.1.1.1 - Editing/Configuring An Individual Rule In A Set - ZyXEL Communications Prestige 650R-31/33 User Manual

Prestige 650R-31/33 ADSL Router
Figure 7-9 Menu 15.1.1.1 – Editing/Configuring an Individual Rule in a Set
Table 7-6 Menu 15.1.1.1 – Editing/Configuring an Individual Rule in a Set
FIELD
Type Press [SPACE BAR] and then [ENTER] to select from a total of five types.
These are the mapping types discussed in Table 7-2. Server allows you to
specify multiple servers of different types behind NAT to this computer. See
section 7.5.3 for an example.
Local IP Only local IP fields are N/A for server; Global IP fields MUST be set for
Server.
Start This is the starting local IP address (ILA).
End This is the ending local IP address (ILA). If the rule is for all local IPs, then
put the Start IP as 0.0.0.0 and the End IP as 255.255.255.255. This field is
N/A for One-to-One and Server types.
Global IP
Start This is the starting global IP address (IGA). If you have a dynamic IP, enter
0.0.0.0 as the Global IP Start. Note that Global IP Start can be set to
0.0.0.0 only if the types are Many-to-One or Server.
End This is the ending global IP address (IGA). This field is N/A for One-to-One,
Many-to-One and Server types.
Server Only available when Type is set to Server. Type a number from 1 to 10 to
Mapping choose a server set from menu 15.2.
Set
Once you have finished configuring a rule in this menu, press [ENTER] at the message "Press ENTER to
Confirm..." to save your configuration, or press [ESC] to cancel.
7-12
Menu 15.1.1.1 Address Mapping Rule
Type= One-to-One
Local IP:
Start=
End = N/A
Global IP:
Start=
End = N/A
Server Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION EXAMPLE
One-to-
One
0.0.0.0
N/A
0.0.0.0
N/A
NAT