Table of Contents
Advertisement
For more information on configuring the filter rule parameters,
refer to the next section.
To configure a specific filter rule, simply select the number of the
filter rule (1-6) you wish to configure and press ENTER. This will
take you to Menu 21.1.1 - TCP/IP Filter Rule (next section).
Configuring a Filter Rule
There are four types of filter rules that you can configure. Some of
the parameters will differ depending on the type of rule. When you
first enter the filter rule menu, you will be presented with Menu
21.1.1 - TCP/IP Filter Rule. If you wish to configure another type
of filter rule, you need to select the appropriate type (by pressing
SPACE bar) under the Filter Type field and press ENTER. This
will bring you to the corresponding menu.
TCP/IP Filter Rule
This section will show you how to configure a TCP/IP filter rule for
your Prestige. The fields in the menu are indicated in bold type.
PT - IPX Packet Type.
SS - Source Socket.
DS - Destination Socket.
Filter Configuration 97
Advertisement
Table of Contents
