Parameter Entry - YASKAWA VS-616PS5 Series Quick Start Manual

Parameter Entry

When power is applied, the display defaults to the reference setting:
DRIVE
PRGM
Press the
DATA
Press the
ENTER
The first 0 will be blinking. This is the value for access to the Quick Start parameters.
We want to keep this value, so press
Press the key to go to the next parameter:
DATA
ENTER
Press the
We want to enter 3330 for 3-wire operation. The first zero will be blinking.
Press the key three times to change the first number to 3.
Now the display will show:
Press the key to go to the next digit. Now the second digit is blinking.
Press the key three times to change the second number to 3:
Use the and
DATA
Press the
ENTER
DRIVE
Press the
PRGM
The display is now ready for a speed reference entry:
The digit to be changed is blinking.
Use the ,
DISPL
Press the
VS-616PS5 Installation & Quick Start Manual
key to access the parameters.
key to display the value. The default is:
key to display the value. The default is:
3000
with the 3 blinking.
keys to change the third digit to 3:
key to enter the number. Press the
key to return to the reference entry (normal) mode.
, , and
key to see the speed display.
A1-01
DISPL
to go back to:
A1-03
DISPL
P 00.00
DATA
keys to set the desired reference in percent speed.
ENTER
P 00.00
is displayed.
0002
A1-01
.
0000
3300
3330
key to return to
A1-03
29