YASKAWA VS-616PS5 Series Quick Start Manual page 63

O2 Key Selection
O2-01 Local/Remote Key
Enables/disables the digital operator LOCAL/REMOTE key.
Setting Explanation
0
1
O2-02 STOP Key During External Terminal Operation
Enables/disables the digital operator STOP key, during operation from the external terminals and during serial
communication.
Setting Explanation
0
1
O2-04 Inverter Model Selection
Sets the inverter capacity, according to the model number. Control parameters with defaults specific to the
inverter's capacity are set automatically (i.e. carrier frequency, motor data, etc.). This parameter does not need
changing, unless the control board is replaced.
Minimum Maximum Description
00 FF
62
Local/Remote key is disabled.
Local/Remote key is enabled (factory default).
Depressing the Local/Remote key switches operation commands
between the digital operator and the settings of B1-01 & B1-02.
The digital operator STOP key is disabled when Run command
does not come from the digital operator
The digital operator STOP key is always enabled.
The STOP key is enabled even during external terminal operation
and serial communication.
Inverter Model Selection.
Default
Default
Default Setting
VS-616PS5 Installation & Quick Start Manual
X
X
--