Nortel Media Gateway 1000E PRI Installation And Comissioning Manual page 90

90 Configure an E1/T1 card
5
6
Table 22
Configuration for PRI2 data block system timers (LD 73)
Prompt Response
REQ aaa
TYPE PRI2
FEAT SYTI
... ...
MGCLK sl s c
- PREF Card
- SREF Card
MGCLK sl s c
- PREF Card
- SREF Card
... ...
Use
91)
Media Gateway 1000E PRI Gateway Installation and Commissioning
Copyright © 2007, Nortel Networks
.
0000
Access LD 73. Enter the command:
LD 73
Enter the responses shown in
block system timers (LD 73)" (page
Description
Request (aaa = CHG, END, NEW, OUT, or PRT).
DTI2 and JDMI are not supported for MGP.
Feature = SYTI (System Timers)
Superloop, shelf, card number of PRI2 containing the Primary
Clock Reference for the first IPMG.
The card number (1 - 8) should match the span number
configured through the Web interface.
Card number of PRI2 containing the Primary Clock Reference
for the first IPMG.
Card number of PRI2 containing the Secondary Clock
Reference for the first IPMG.
To modify, use the CHG command (you can change the PREF
only if you change the MGCLK).
Superloop, shelf, card number of PRI2 containing the Primary
Clock Reference for the second IPMG.
The card number (1 - 8) should match the span number
configured through the Web interface.
Clock Reference for the second IPMG.
Card number of PRI2 containing the Secondary Clock
Reference for the second IPMG.
To modify, use the CHG command (the PREF cannot be
changed unless the MGCLK is changed).
Procedure 25 "Configuring the PRI2 loop timers using LD 73" (page
to configure the PRI2 loop timers and thresholds.
Nortel Communication Server 1000
NN43041-311 01.01 Standard
Release 5.0 30 May 2007
Table 22 "Configuration for PRI2 data
90).
—End—