Nortel Media Gateway 1000E PRI Installation And Comissioning Manual page 104

104 Configure an E1/T1 card
5
6
Table 29
LAN Parameters
Field
system name ()
report aging days (32)
subnet mask (255.255.255.0)
gateway address (1.1.1.254)
IP address (1.1.1.1)
7
8
Verify network connections
You can verify the network connections from the CLI of the E1/T1 card. See
Procedure 36 "Verifying network connection from the CLI" (page
can also verify the network connections from a PC on the ELAN subnet.
See
Procedure 36
Verifying a network connection from the CLI
Step
1
2
Media Gateway 1000E PRI Gateway Installation and Commissioning
Copyright © 2007, Nortel Networks
.
The system displays the system attributes and prompts you to
modify, save, or cancel.
Enter the command:
m
Fill in the fields with the values shown in
(page 104).
To save the values, enter this command:
s
The system saves the attributes and prompts you to restart the card.
To restart the card, when you see the prompt Restart the
card?, enter this command:
y
Procedure 37 "Verifying a network connection from a PC" (page
Action
To log on to the system, enter this command:
admin
Press enter for the password.
Nortel Communication Server 1000
NN43041-311 01.01 Standard
Release 5.0 30 May 2007
Table 29 "LAN Parameters"
Enter this value
first-MGP
14
255.255.255.0
141.226.128.254
141.226.128.172
—End—
104). You
105).