Nortel Media Gateway 1000E PRI Installation And Comissioning Manual page 82

82 Configure an E1/T1 card
CTYP MSDL
MG_CARD supl sh card
0 - 1
PORT
USR PRI
IFC NI2
DCHL 0 - 255
SIDE (USR) NET
... ...
Use the steps in
PRI2/EURO D-channels using LD 17" (page 82)
D-channel interface for the PRI Gateway.
Procedure 20
Configuring a D-channel interface to support PRI2/EURO D-channels using
LD 17
Step
1
2
3
Media Gateway 1000E PRI Gateway Installation and Commissioning
Copyright © 2007, Nortel Networks
.
D-channel configuration on MSDL card.
MSDL= NTBK51AA downloadable D-channel daughterboard.
TMDI is not supported for MGP.
The physical card for the digital loop association to the PRI
Gateway.
The format is: superloop, shelf number, card number.
Note: Even card numbers are applicable (that is, 2, 4, 6, 8).
Port number of the NTBK51AA for the D-channel.
Note: The use of port 0 is supported in CS 1000 Release 5.0
with the patch.
This D-channel is used for Primary Rate only.
Interface type for the D-channel.
Loop number for the D-channel. (See DLOP loop number.)
The system is network/user side.
Procedure 20 "Configuring a D-channel interface to support
Action
Log on to the CS 1000E.
Enter the command:
LOGI
System response:
USERID?
Enter the default username:
admin1 or admin2
System response:
PASS?
Nortel Communication Server 1000
NN43041-311 01.01 Standard
Release 5.0 30 May 2007
—End—
to configure the PRI2/Euro