Nortel Media Gateway 1000E PRI Installation And Comissioning Manual page 88

88 Configure an E1/T1 card
Procedure 23
Configuring a digital data block using LD 73
Step
1
2
3
4
5
6
Table 21
Digital data block configuration for PRI (LD 73)
Prompt Response
REQ aaa
TYPE DDB
MGCLK sl s c
- PREF Card
- SREF Card
Media Gateway 1000E PRI Gateway Installation and Commissioning
Copyright © 2007, Nortel Networks
.
Action
Log on to the CS 1000E.
Enter the command:
LOGI
System response:
USERID?
Enter the default username:
admin1 or admin2
System response:
PASS?
Enter the default password:
0000
Access LD 73. Enter the command:
LD 73
Enter the responses shown in
configuration for PRI (LD 73)" (page
Description
Request (aaa = CHG, END, NEW, OUT, or PRT).
Digital data block.
Superloop, shelf, card number of PRI containing the Primary
Clock Reference.
The card number (1 to 8) should match the PRI Gateway span
number configured through the Web interface.
Card number of PRI containing the primary clock reference
for the first IPMG.
Card number of PRI containing the Secondary Clock Reference
for the first IPMG.
To modify, use the CHG command (you can change the PREF
only if you change the MGCLK).
Nortel Communication Server 1000
NN43041-311 01.01 Standard
Release 5.0 30 May 2007
Table 21 "Digital data block
88).