Pri Digital Trunk Loop Configuration - Nortel Media Gateway 1000E PRI Installation And Comissioning Manual

•
PRI digital trunk loop configuration
Procedure 16 "Configuring PRI loops using LD 17" (page 77)
the configuration in LD 17 to support PRI/T1 loops (common equipment
parameters) on the PRI Gateway.
Procedure 16
Configuring PRI loops using LD 17
Step
1
2
3
4
5
6
Table 13
PRI loop configuration (LD 17)
Prompt Response
REQ CHG
TYPE CEQU
CFN YES
...
Media Gateway 1000E PRI Gateway Installation and Commissioning
Copyright © 2007, Nortel Networks
.
PRI, PRI2, and DPNSS/DASS trunks
Action
Log on to the CS 1000E.
Enter the command:
LOGI
System response:
USERID?
Enter the default username:
admin1 or admin2
System response:
PASS?
Enter the default password:
0000
Access LD 17. Enter the command:
LD 17
Enter the responses shown in
17)" (page 77).
Note: VDC configuration is not required for DASS signaling.
Description
Change existing data.
Make changes to common equipment parameters.
Common equipment.
Nortel Communication Server 1000
NN43041-311 01.01 Standard
Release 5.0 30 May 2007
Configure E1/T1 ports on a Call Server 77
Table 13 "PRI loop configuration (LD
describes