Configure Pri, Pri2 And Dpnss Trunks - Nortel Media Gateway 1000E PRI Installation And Comissioning Manual

96 Configure an E1/T1 card
xx
CUST
ROUT 0 - 511
DES DPNSS/
DASS
... ...
TKTP IDA
SIGL DPN/DAS
... ...
ICOG xx
SRCH (LIN) RRB
xxx..x
ACOD
TARG 0-(1)-31
Configure PRI, PRI2 and DPNSS trunks
Procedure 29 "Configuring PRI and PRI2 trunks with Trunk Data Block data
using LD 14" (page 96)
data required for PRI and PRI2 trunks.
Procedure 29
Configuring PRI and PRI2 trunks with Trunk Data Block data using LD 14
Step
1
2
3
4
Media Gateway 1000E PRI Gateway Installation and Commissioning
Copyright © 2007, Nortel Networks
.
Customer number, as defined in LD 15.
Route number. Range is the same as for Large System and
CS 1000E system.
Designator (up to 16 alphanumeric characters)
Trunk type – integrated digital access trunks
DPN = DPNSS signaling
DAS = DASS signaling
Either incoming, outgoing, or both way trunks.
Search method for outgoing trunk member.
One seven-digit access code for the trunk route.
Trunk Access Restriction Group Number.
describes how to configure the Trunk Data Block
Action
Log on to the CS 1000E.
Enter the command:
LOGI
System response:
USERID?
Enter the default username:
admin1 or admin2
System response:
PASS?
Enter the default password:
Nortel Communication Server 1000
NN43041-311 01.01 Standard
Release 5.0 30 May 2007
—End—