Figure 17
General status display
Configure LAN parameters
A logon prompt appears following power-up. You can now configure the
LAN parameters. See
Procedure 35
Entering LAN parameters
Step
1
2
3
4
Media Gateway 1000E PRI Gateway Installation and Commissioning
Copyright © 2007, Nortel Networks
.
Procedure 35 "Entering LAN parameters" (page
Action
To log on to the CLI, enter the command:
admin
The system displays the current directory (/ root directory).
Press enter for the password.
To move to the system administration directory, enter the command:
cd sadmin
The system displays the /sadmin directory.
Enter the command:
system
Nortel Communication Server 1000
NN43041-311 01.01 Standard
Release 5.0 30 May 2007
Initial configuration of the E1/T1 card 103
103).