Rack-mount and ground PRI Gateway
components
This chapter contains information about the following topics:
•
•
•
Introduction
This chapter contains the procedures for mounting components into the
customer-supplied, 480 mm (19 in.) rack.
This chapter contains the following procedures:
•
•
For more information about the layout of a CS 1000E equipment rack,
see Communication Server 1000E Installation and Commissioning
(NN43041-310).
Rack-mount a PRI Gateway
To install the PRI Gateway in a 480 mm (19 in.) rack, the following items
are required:
•
•
•
Media Gateway 1000E PRI Gateway Installation and Commissioning
Copyright © 2007, Nortel Networks
.
"Introduction" (page 45)
"Rack-mount a PRI Gateway" (page 45)
"Ground a PRI Gateway" (page 46)
Procedure 1 "Rack-mounting a PRI Gateway" (page 46)
Procedure 2 "Grounding PRI Gateway components" (page 46)
equipment layout plan
a 480 mm (19 in.) rack
Note: The 480 mm (19 in.) rack is a customer supplied item.
four .216 - 24 X .500 STL 289A screws (code P097F813)
Nortel Communication Server 1000
NN43041-311 01.01 Standard
Release 5.0 30 May 2007
45