Table of Contents
Advertisement
0-511 1-4000
RTMB
...
...
TGAR
0 - (1) - 31
...
...
CLS
aaaa
...
...
Enable PRI spans
For every span on the E1/T1 card, enable the NTBK51AA card or the
NTAK93AB daughterboard and enable the clock controller.
If you use the NTBK51AA daughterboard, follow the procedure described
in
Procedure 31 "Enabling the NTBK51AA daughterboard" (page 99)
enable the PRI spans through software.
If you use the NTAK93AB daughterboard, follow the procedure described
in
Procedure 32 "Enabling the NTAK93AB daughterboard" (page 100)
enable the DPNSS/DASS spans through software.
To enable the clock controller, follow the procedure described in
33 "Enabling the clock controller" (page
Procedure 31
Enabling the NTBK51AA daughterboard
Step
1
2
3
4
Media Gateway 1000E PRI Gateway Installation and Commissioning
Copyright © 2007, Nortel Networks
.
Route number and member number.
Range is the same as that for CS 1000E system.
Trunk Group Access Restriction. The default "1" automatically
blocks direct access.
Class of Service.
Action
In LD 60, enter the command to enable all 1.5/2.0 Mb PRI loops
through the software:
ENLL L
If the DDCH is disabled, enter the command in LD 96 to enable
the DDCH:
ENL MSDL sl s c
To enable the D-channels, enter the command in LD 96:
ENL DCH X
To request the current status of the D-channel, enter the command:
STAT DCH
Nortel Communication Server 1000
NN43041-311 01.01 Standard
Release 5.0 30 May 2007
—End—
100).
Enable PRI spans
99
to
to
Procedure
Advertisement
Table of Contents
