Access And Configure An E1/T1 Card Through The Web - Nortel Media Gateway 1000E PRI Installation And Comissioning Manual

108 Configure an E1/T1 card
3
CLI over a Web-based interface
You can access the CLI through the administrative console, which is useful
if a firewall does not allow Telnet access. See
command line interface over the Web" (page
Procedure 39
Accessing the command line interface over the Web
Step
1
2
Access and configure an E1/T1 card through the Web
You can configure the E1/T1 card basic parameters and access basic
information through the Web. The information includes:
•
•
•
•
•
•
•
See
through the Web" (page
Media Gateway 1000E PRI Gateway Installation and Commissioning
Copyright © 2007, Nortel Networks
.
•
8 data bits
• 1 stop bit
• no parity
Make sure that flow control is none.
Action
To open a CLI screen, access the administration console and click
CLI on the toolbar at the top of the screen.
A separate window opens.
Enter commands and text as needed.
system settings
password change
users
upgrades
reports
backups
restores
Procedure 40 "Accessing the basic parameters for the E1/T1 card
Nortel Communication Server 1000
NN43041-311 01.01 Standard
Release 5.0 30 May 2007
—End—
—End—
109).
Procedure 39 "Accessing the
108).