Table of Contents
Advertisement
Figure 127. Installing the BOSS-N1 shroud
2. Push the BOSS-N1 shroud into hook on cage and fasten screw to fix the BOSS shroud.
Next steps
1. Follow the procedure listed in
System battery
This is a service technician replaceable part only.
Replacing the system battery
Prerequisites
WARNING:
There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only
with the same or equivalent type that is recommended by the manufacturer. Discard used batteries according to
the manufacturer's instructions. See the Safety instructions. that came with your system for more information.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. If applicable, disconnect the power or data cables from the expansion cards.
4.
Remove the expansion card
156
Installing and removing system components
After working inside your
Safety
instructions.
Before working inside your
risers.
system.
system.
Advertisement
Table of Contents
