Table of Contents
Advertisement
Figure 56. Configuration 3: 8 x 2.5-inch SAS_SATA fPERC11
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 68. Configuration 3: 8 x 2.5-inch SAS_SATA fPERC11
Order
1.
2.
Figure 57. Configuration 4: 8 x 2.5-inch SAS_SATA fPERC12
From
SIG_PWR_1 (system board power connector)
SL11_CPU2_PB6 (signal connector on system board)
Installing and removing system components
To
BP_PWR_1 (Front backplane
power connector)
CTRL_DST_PA1 (fPERC input
connector)
93
Advertisement
Table of Contents
