Figure 64. Installing the adapter PERC
Next steps
1. Install the
expansion card
2.
Install the air
shroud.
3. Follow the procedure listed in
System battery
This is a service technician replaceable part only.
Replacing the system battery
Prerequisites
WARNING:
There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only
with the same or equivalent type that is recommended by the manufacturer. Discard used batteries according to
the manufacturer's instructions. See the Safety instructions that came with your system for more information.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the air
shroud.
Steps
1. To remove the battery:
a. Use a plastic scribe to pry out the system battery.
68
Installing and removing system components
riser.
After working inside the
Safety
instructions.
Before working inside your
system.
system.