Table of Contents
Advertisement
Air shroud
Removing the air shroud
Prerequisites
CAUTION:
Never operate your system with the air shroud removed. The system may get overheated quickly,
resulting in shutdown of the system and loss of data.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Follow the procedure listed in
4. Remove the cables from the air shroud notch, place them on the other shroud on the other side of the system.
Steps
1. Press the latch on the air shroud.
NOTE:
To remove left air shroud, press the latch on right air shroud the opposite way.
2. Hold the edges of the air shroud, and lift the air shroud out of the system.
Figure 27. Removing the left air shroud
Safety
instructions.
Before working inside the
Removing the expansion card risers
system.
to remove the Riser 1.
Installing and removing system components
67
Advertisement
Table of Contents
