Installing The Internal Usb Card - Dell PowerEdge R760xa Installation And Service Manual

Next steps
1. Replace the internal USB

Installing the internal USB card

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the expansion card
Steps
1. Connect the USB key to the internal USB card.
NOTE: For information on the exact location of internal USB card on system board, see
connectors section.
2. Align the internal USB card with the connector on the system board and press firmly until the internal USB card is seated.
Figure 131. Installing the internal USB card
Next steps
1. Install the expansion card
2. Follow the procedure listed in
3. While booting, press F2 to enter System Setup and verify that the system detects the USB memory key.
card.
Safety instructions.
Before working inside your
risers.
risers.
After working inside your
system.
system.
Installing and removing system components
System board jumpers and
159