Installing A Nvme Drive Blank - Dell PowerEdge R760xa Installation And Service Manual

Figure 43. Removing a NVMe drive blank
Next steps
1. Replace the NVMe drive

Installing a NVMe drive blank

Prerequisites
1. Follow the safety guidelines listed in the
2. If installed, remove the front
3. Remove all drives.
4. Remove the drive backplane
5. Remove the drive backplane.
CAUTION: For proper system cooling, drive blanks must be installed in all empty drive slots.
NOTE: NVMe drive blank is applicable for the system with x6 NVMe drive configuration.
Steps
Slide the NVMe drive blank into the drive slot, until clicks into place.
blank.
Safety instructions.
bezel.
cover.
Installing and removing system components 81