Dell PowerEdge R760xa Installation And Service Manual page 89

Figure 52. Cabling for Front GPU riser module and Risers R1 and R4
NOTE: Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 64. Cabling for Front GPU riser module and Risers R1 and R4
Order
1.
2.
3.
4.
From
SL13_CPU1_PB7 (signal
connector on system board)
and SL14_CPU1_PA7 (signal
connector on system board)
SL9_CPU2_PA5 (signal
connector on system board)
and SL10_CPU2_PB5 (signal
connector on system board)
SL3_CPU1_PA2 (signal
connector on system
board)/ SL4_CPU1_PB2 (signal
connector on system
board)/ SL7_CPU1_PB4 (signal
connector on system
board)/ SL8_CPU1_PA4 (signal
connector on system board)/
SIG_PWR_2 (system board
power connector)
SL1_CPU2_PA1 (signal
connector on system
board)/ SL2_CPU2_PB1 (signal
connector on system
board)/ SL5_CPU2_PB3 (signal
connector on system
board)/ SL6_CPU2_PA3 (signal
connector on system board)/
SIG_PWR_0 (system board
power connector)
To
Riser 1
Riser 4
GPU Riser R (SLOT36/ SLOT38/ RDW)
GPU Riser L (SLOT31/ SLOT33/ LDW)
Installing and removing system components 89