Table of Contents
Advertisement
Figure 155. Installing the BOSS-N1 module blank
To install the BOSS-N1 module:
1. Install the BOSS-N1 module. To install the BOSS-N1 , see
2. Install the M.2 SSD. To install the M.2 SSD, see
NOTE:
Installing the BOSS-N1 card carrier does not require the system to be powered off. System shutdown is only
required when installing the BOSS-N1 module.
To remove the BOSS-N1 module:
1. Power off the system and
2. Remove the M.2 SSD. To remove the M.2 SSD, see
3. Remove the BOSS-N1 module. To remove the BOSS-N1 module, see
4. Install the BOSS blank.
NOTE:
Removal of the BOSS-N1 card carrier does not require the system to be powered off. System shutdown is only
required when removing the BOSS-N1 module.
NOTE:
Disconnect the BOSS signal cable and the BOSS power cable before lifting the controller card module from the
system.
installing the BOSS-N1 module
remove the system
cover.
installing the BOSS-N1 module
removing the BOSS-N1 module
removing the BOSS-N1 module
steps 1 to 5.
steps 6 to 10.
steps 1 to 4.
steps 5 to 8.
Upgrade Kits
183
Advertisement
Table of Contents
