Dell PowerEdge R760xa Installation And Service Manual page 14

Table 6. Rear view of the system (continued)
Item Ports, panels, or
slots
12 OCP NIC card blank
13 NIC ports (optional)
14 Power supply unit
(PSU1)
NOTE: For more information about the ports, see the
14 DellPowerEdge R760xa system overview
Icon Description
NOTE:
the System ID button for more than five seconds to enter the BIOS
progress mode
NOTE:
pressing F2 during system boot), press and hold the System ID button
for more than 15 seconds.
N/A The optional OCP NIC card supports OCP 3.0. The NIC ports are integrated
on the OCP card which is connected to the system board.
The NIC ports that are integrated on the LOM card provide network
connectivity which is connected to the system board.
PSU1 is the primary PSU of the system.
Technical Specifications
If the server stops responding during POST, press and hold
To reset the iDRAC (if not disabled on the iDRAC setup page by
section.